R/C Tech Forums - View Single Post - Tekno SCT410 Thread
View Single Post
Old 08-19-2013 | 07:28 AM
  #13698  
jamr1130
Tech Master
iTrader: (120)
 
Joined: Apr 2011
Posts: 1,076
From: SoCal - Chillin in the LBC
Default

Originally Posted by Brandonmorris44
Ok I removed center diff greased orings and out drives then put back together as the kit manual indicates . Still spraying oil out . I don't get it

Originally Posted by Bernard_Jr
I'd say that's weird for a new kit. maybe you need a new diff case. make sure it's not cracked.
I had the same issue with my RC8.2e. No matter how many times I took the center diff apart, used Mugen diff gaskets, replace orings, used Mobil1 red syntheic grease (which IMO is the best on oring sealing) It still leaked. Thought it was from the out drives but hard to tell as the whole diff would be gunked up after a few runs. Ends up it was my spur gear. Thing was slightly warped. Replaced it and viola! No more leaks. So it could be the spur or the case like Bernard_Jr suggested.

Last edited by jamr1130; 08-19-2013 at 10:55 AM.
jamr1130 is offline