R/C Tech Forums - View Single Post - Palmaris engine thread
View Single Post
Old 12-06-2004 | 04:12 AM
  #1117  
EdwardN's Avatar
EdwardN
Tech Elite
iTrader: (1)
 
Joined: May 2003
Posts: 2,168
From: SoCal
Default Re: BRB set

Originally posted by xtreme888
HI Ed,

It was actually dry today, but someone vandled the track with cement dust !!! Never the less we raced today !! The BRB was in a NSR5 ports, initally i used a 6mm charge pipe and manifols.....it was ok. I ten borrowed a serpent outlaw pipe with a charge manifold....the car was ballistic. I FTD and won the 15 min final from start to finish ( with the help of a good pitman !!!). Second place was 5 laps down !!! The front belt stripped, but not completely in the first 5 min, so i was running a bit of 2 wds and 4 wds !!! A full tank lasted between 6 and 7 minutes, as i have about 1/2 tank in the end after the second stop at 10 min mark.

p.s ed, in what way is the new BRB set different in performance compared to the earlier set ?
Hi Phillip.
I glad to hear that you finaly tested BRB with good finish.
The difference between 1s and 2nd version in power wise is overall power gain-it just much more powerfull. Now 3 rd version i even faster. New batch is comming in 2 days ( I already tracing it in USA). I am not sure how many will be available-most of them is already sold.
Edward.
EdwardN is offline