Originally Posted by
dirty_rooster
Speaking of charger adjustments, I also have a PL8. Do you mind sharing your presets for accurate,high power and storage charging modes?
Never used accurate.
I use high power. I don't have access to the CCV program now but here are the key things I set. All the rest is pretty much what they have it set at.
Balancing:
Start at 4v
1000mAh
Only on charge not on discharge.
Termination:
Manual termination set at 500mAh. What this does is regardless of the amp rate you charger at the pack will always get the same amount of charge. So at 2 amps or 40 amps you will get the same charge.
Charging:
4.205V per cell
Use the amp rate you prefer for charging.
That's all I can think of for now.
Storage mode I use how they have it setup and will use a higher amp rate if I'm in a hurry.
Hope this helps.