When the truck shuts down nothing is flashing on the esc its has the normal lights on if I hit full throttle the green light comes on when brake is applied the red and yellow when neutral. It acts like I hit the lvc so I just have servo function but since the lights on the speedo do follow what I do with my remote and Its not throwing a code of locked rotor or anything my suspicion lead me to a motor problem. Since I already tried 2 new sensor wires all thats left is the board in the motor. So I went ahead and ordered a new timing/sensor board for the balistic since it was only 15 bucks. Im going to try this first since my 120 day warranty is up. I dont have another motor or speedo to try unfortunetly. Ill report back what I find out