Originally Posted by
charlesandstuff
I do have the 4 pole firmware and have tried re downloading the firmware and everything. Still have the same issue. I use the smc 5600 70c packs and I know a bunch of other people that use the same packs without issues but they use the rx8. But I will try to see what I can do.. Anymore suggestions? Also It ran fine with a scx4 5.5t motor I used to have. I didnt have the one second loss of acceleration issue that im having now..
Well, I hate to say it but the RX8 is a very good esc and as well and you can easily sell your R10. In the meantime, unplug the sensor wire in your R10. When the R10 defaults to sensorless mode, it actually cuts the power down. So, if it is going to be there anyways, as might as well have the extra power. The other option is to try to change out the sensor board on the 4600 and see if you get one that makes your orion happy. I worked with them on the 4 pole software and they never opened things up enough to make all motors happy.