R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 08-11-2013 | 09:13 PM
  #34767  
Wild Cherry's Avatar
Wild Cherry
Tech Legend
 
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Default

sundance
rather then get into a piss match with some here ?

Do as I suggested ..

I recommended starting at 4mm because you said carpet .

Think that may be best for you .

Still try 7mm and see how it affects the handling for yourself .

Don't believe me or who ever ....


to help

2 or 3 mm will make a noticeable effect on the handling and you can learn which works best for you by trying both .

Last night me & my teammate started at 4mm .

conditions became very grabbie & dusty

so we went to 6mm and we both experience improved laps times as the truck rolled less in the sharp corners and made it more stable & predicable in the corner as well .

he achieved a great qualifying position as a result , myself not so good but my laps time showed improvement ...

so I stuck with and had a great main considering how I qualified. ...

Last edited by Wild Cherry; 08-11-2013 at 09:35 PM.
Wild Cherry is offline