R/C Tech Forums - View Single Post - How to solder correctly (a not so brief lesson)
Thread: How to solder correctly (a not so brief lesson)
View Single Post
Old 07-28-2013 | 10:41 AM
  #370  
Dave H
Tech Champion
 
Joined: Oct 2007
Posts: 7,342
Default
Originally Posted by yamasledhead
Ok I have a problem, hoping for some advice. I have a Tekno 4x4, tekin rx-8 and 4300hd motor, 7200 70c battery running bullet connectors right from esc. I am having issues with black/neg lead unsoldering itself from the bullet lead from esc, right at the bullet. I have turned current limit down to 50%, thought that helped, but after 3 pushed qualies, 2min into main pop, and it was barely 70degrees here in Michigan yesterday.

Sorry for length, and advice is appreciated.
What style connectors are you using? Use solid bullet style connectors like these, Fantom, TQ Wire, Duratrax, etc.



Not spinning cage banana style like this, they heat up too much especially after some use.

Dave H is offline  
Reply