I have a question in reference to a FS-GT3C transmitter. I had all my boats (4) programmed into the FS-GT3C. All worked well for 5 months or so. Now without any reason I’m aware of I only have 1 receiver that it will communicate with. Tried rebinding receivers, reprogramming the models on the FS-GT3C, changing to different receivers etc. all programing functions appear to be OK on the transmitter display. The transmitter works just like it always did on the still functioning model, no glitches at all. I'm very familiar with the programing of this transmitter. ( or at lease I thought so until this!)
It seems very weird that the transmitter would dump the 9 model channels and 1 still works OK. However no combination of different receivers, different model channels will get a communication path with any except the 1 channel. All receivers work just fine with the 1 working channel (binding with different receivers/ transmitters as required) as well as with another FS-GT2. Actually I have the 3 receivers for the other boats working from the FS-GT2.
Some sort of a master reset/ return to default sitting would probably do it however there is no such animal.
I hope I have explained this. Bottom line, the transmitter worked fine a few weeks ago with all 10 model channels (I was using 4 but had tested all 10 on the original set up) but now I can only get 1 model channel to function. It worked fine one weekend and the next only 1 channel works. I am having a hard time believing this is some kind of weird software thing but ????
Thoughts?
Thx