OK! You need the info from the guy who has done what you are asking about. I do run a Novak glitch buster cap on my power input leads of my R10 pro. Cut the connector off the GB and solder in place of the power cap bank. The GB is a way bigger cap than the power bank from the R10. My esc temps dropped 15 degrees after doing this and I too run a 6.5 in my T4.2. My father, the electronic engineer of 30 years, taught me all about capacitors and some other various electronic gizmos so it gave me the confidence to try it. Make sure to get the polarity correct! Dont always follow the rc hype.