R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
View Single Post
Old 07-11-2013 | 04:03 PM
  #7849  
rcguy76559's Avatar
rcguy76559
Tech Addict
iTrader: (22)
 
Joined: Dec 2009
Posts: 668
From: Jarrell tx
Default

Originally Posted by Matthew_Armeni
Well they're close in that they're about 3/4 of a rate away from each other but the Kyosho yellow (2.95) or green (3.16) rear is much closer to the Tekno red (2.93) rear.

Do you mean they "feel" close? As in when you compress them in your hand?
Yes by hand just to compare them. I borrowed the lt blue rear springs put them on the handle of my nut driver with the tekno red rears and compressed them. But maybe thats a bad way to compair. Basically what i wanted to try is running the same spring rate as the tekno yellow front and orange rears. But use kyosho springs that are more progressive and that are very close to those tekno ones by feel in hand. Hopefully this makes sense. I due appreciate all the help btw and info!!!
rcguy76559 is offline