Originally Posted by
jhautz
Is there any chance we can get 1/2 and 1 .5 offset adjustment pills for the hinge pin holders? Right now there is only Center or 1 dot up or 1 dot down. I would like to see adjustment of half that and one and a half times. I think there's plenty of room in the pill to do it. Any chance to get that as an option part tekno?
As a matter of fact, you can,
(The 1/2, that is.) The latest packages of TKR5021 have the 1/2 pills. We updated the mold so you'll now have an "in-between" setting for fine tuning. The new pill has two dots on it, one centered and the other offset towards the hole location.
As for a 1.5 setting, there's some issues with making those. First you'll start getting very close to the edge of the pills and having thin spots. Second thing is that if you were to run max settings on your car you have a little less hinge pin engagement inside the pill which could cause it to pop out under extreme situations. Lastly, again when running a max setting, you could introduce some mechanical binding in the suspension movement. Also, I'm not sure when you'd really need that extra 1/2 degree, with the optional 1.5 toe block you should be good.