Originally Posted by
imrob
Does any body use the inboards on a sc 10 4x4. i have one wired set. I like it but im thinking the inboards might be easier to put in and take out as the weird one takes some time to get that 10 gauge under the belt cover cant go over cause the wires hit the battery brace and this is with the wires in the back of the truck which seem to be the best way for now. Thanks in advance Rob
Inboard is all I used when I had the SC10 4x.
You should direct wire from the ESC to bullet plug to the inboard pack however so your other packs would not be used any longer. Other wise you are adding another connector and increasing internal resistance (IR).
Danny says the packs you use now have less IR than the inboard way of doing it though because of how they are wired inside the pack so I guess it would only be for convenience. I have always used inboard and would have to buy all new packs if I were going to switch so its inboard packs for me.