The 2096 has plenty of rip especially with the P5. I run a 2096 on my plus 4 btt and both Mel and Bill run the 2096 on the keep off 4. I felt the 9901 had to much bottom end not enough top for the plus 4. The 2096 is smooth enough on the bottom that it reduces wheel spin coming out of the corner to allow the buggy to hook up and launch hard. I can clear every jump at family no problem. Also the midrange is very smooth, just like the bottom end. Dont read smooth as lacking power...my buggy gets out of the hole very hard. Limited wheel spin means traction! If you want I'll let you wheel it a few laps during practice Saturday once I sort out a few of the set-up changes I did this week.