View Single Post
Old 06-05-2013, 09:34 AM
  #244  
YLLIB
Tech Master
iTrader: (1)
 
YLLIB's Avatar
 
Join Date: Sep 2001
Location: California
Posts: 1,709
Trader Rating: 1 (100%+)
Default

Originally Posted by sammies View Post
Hi,

From what I have read, the .21 EMX should come installed with 0.4mm worth of shims.

I was preparing my EMX for run-in this weekend, and realized that mine only came with 0.1mm worth of shims, i.e. 1 copper shim.

Something wrong some where? Or am I missing something here?
Hello Sammies, they acually come with .32 or .34, what ever calibers will all may use copper shim, I have never seen or heard of this mistake before from the 2012 or 2013 PICCO engines. Where did you purchase your engine from? Did you measured the shim with calibers? If you have and it is truely .1mm, we are truely sorry for the mistake. I will send out some shims if needed.
Please let me know. If it is .1mm in the engine then we must add .4 mm more shims, if it is .32 copper when you measure then only add a .1 shim or .2 shim to the engine in hot conditions. Plese get back with me.

Thank you Billy
YLLIB is offline  
Reply With Quote