Ok sorry for another slipper /diff question on this thread. I just built a bfast in the sct super smooth so far. Did the flick test hold one tire flick the othe it rotates one turn sometime 1-1/4 turn now I'm setting the slipper. Hold both tire and get the fronts to wheelie about 3-4 in... Well that's what I did w my mod motor cars this is 17.5 blinky w 26/78. I backed the slipper off a lot just so I don't bark the diff. Now I'm slowly tightening it. I haven't got it to wheelie yet Just want to make sure w the 17.5 it will before I do bark the diff. So long story short should I be able to get it to wheelie w hold the back two wheels w this motor and gearing.