Originally Posted by
chasingthepack
hi all,i have an orion r10 pro,similar to the hw,i seem to have a delay on the brakes and cant work out why or how to get rid,when braking for slow corners its ok but hit the brakes from high speed and there is this delay,its annoying as the brakes are kicking in just as i hit the apex and then locks the fronts so i run wide,its costing me time,any help would be appreciated
Originally Posted by
XXXDad
Make sure you are fully updated on your ESC....
First re calabrate your throttle neutral/foward/brake... Try neutral range Low 95 and check inital break setting . I run 62.5% brake setting then set your dragbreak to 10% or higher, if low traction 10% is good if higher traction try a higher %... you just dont want the rear end to come around. So if its spinning out use a lower drag break setting. Do you have the program box??
yes tried all that and yes i have the programmer
Originally Posted by
lore
Hi, have you tried initial break set up to 40?
Tha should help.
Ciao,
Lorenzo
yes,i have tried just about everything to lose the delay but its still there,i have taken a vid of whats happening,knowing my luck thats just the way it is,once i have it uploaded ill post it here