R/C Tech Forums - View Single Post - AXE ROSSI Engine thread.....
View Single Post
Old 06-02-2013 | 10:40 PM
  #424  
linjustin2009
Tech Rookie
 
Joined: Jun 2013
Posts: 2
Default Axe Rossi Serpe

Originally Posted by thenova70ss
The Serpe Motor is a GREAT motor for a buggy. I run it in my buggy on a BAD Dusty track wear you could not use all the Power and the motor worked Great it was so Smooth it help me keep from Blowing the tires off coming out of the corners. I ran it in the 2nd Round of the Arkansas Pro Series and Qualified 2 in the A Maine with the motor and had some troubles and had to drop out of the race but the Little Serpe motor is a GOOD motor for the Price it cant be Beat.
hi im justin and i bought an axe rossi serpe 3 months ago and decided to put it inside my kyosho inferno 7.5 kanai ii i brought it to my local hobby shop to swap the clutch and flywheel because i previously install the associated rc8.2 but never started it the owner of the store was tapping the flywheel to take it off other than using a flywheel remover tool and the aplier scratched the bottom of the crankcase which made a dent.. and now the engine is stuck when it turns to the bottom.. i was pissed off but he told me he is gonna fix it so he went online and started to look for a new crankcase but he couldnt find one so he bought an axe rossi sport online and told me the crankcase is the same as the serpe???! but from my knowledge the serpe is 8 port bur sport is 7 dose it fit? please reply thanks
linjustin2009 is offline