R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
View Single Post
Old 05-19-2013 | 08:54 PM
  #6549  
nicholasxuu
Tech Fanatic
iTrader: (13)
 
Joined: Mar 2012
Posts: 781
From: Norcal
Default

Originally Posted by symmetricon
That seems like some very tall gearing to me. With a 1900kv t8, i though a 17tooth was too much, and this is on a medium sized outdoors track....
some people have a very "relating" driving style, that means neutral cruise through some of the sections.
Personally I found it very hard to do, I was taught in racing you should either on gas pedal or brake pedal.

And from the beginning, I found (my) eb48 tend to be very tail happy under braking, a lot of understeer under small acceleration, and back to oversteer when push harder. All of these are very nice, the car's very predictable and easy to drive.
Because of that, I tend to brake in the straight line, and go through the corner with little throttle, let the car kept in the understeer state and safely go through the corner.
Probably not the fastest way, I'm just taking time and learning these monsters.
nicholasxuu is offline