Originally Posted by
pekow91
I need some help with calibrating my esc. I just got a new airtronics radio and i have it binded propretly. I ran the calibration setup and after I enter in the nuetral, full throttle and reverse settings the esc doesn't save and three red lights flash. I have servo movement but no forward or reverse. Any help would be great.
Set neutral width on ESC to 5.
Extra bonus points but probably not needed...
If your radio has it (not sure of your model) go into the fine tuning feature on your radio. Higher end Airtronics have it. Go through calibrating throttle, brake and steering end points and then calibrate the ESC.