R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
View Single Post
Old 05-13-2013 | 12:35 PM
  #6399  
RC_Woody's Avatar
RC_Woody
Tech Regular
 
Joined: Aug 2005
Posts: 314
From: St. Helens, OR
Default

Originally Posted by streetsports
A little over 14 minutes...probably 3-5 minutes shorter than I was getting with the 5000 mah 4s cells.


Woody, it was the rear end being extremely loose...I've been running the Blair setup but I'm now going to try the door setup...I was thinking softer springs and rear sway bar with thinner fluids...but it was a blast and unless the new t8i's are magical I won't be switching any time soon. FYI Darrell said he's open all next weekend.

The stock rear springs are pretty soft already, may want to try removing any anti-squat and some lighter oil first depending on what you are running now. I'm running 30 in the rear. 1.2x10 pistons(stock drilled out). Think I'm going to try 1.3x8(kyosho) with 30wt next.
RC_Woody is offline