Originally Posted by
MrHistory
sounds like you snaked the wire around when the top deck was off? i actually did that and that makes sense but i was obsessed with finding an easier way. Yes please send pics, and the battery you use. Thanks!
You actually don't need to take the top deck off. When I did it I didn't remove it all the way, I just loosened all the screws to move it enough to slide the plug through because I was testing whether or not the wire could move freely after the top deck was in the position its supposed to be in. Below is the link to the life battery I used. They also sell a 1200 version which I also purchased but the size is only different by about 1mm or so. The 1600 fits with no issues once you dremel the battery tray down.
http://rcmarket.com.hk/product_info....ducts_id=13713