R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
View Single Post
Old 05-08-2013 | 04:27 AM
  #6240  
protc3's Avatar
protc3
Tech Lord
iTrader: (13)
 
Joined: Jun 2003
Posts: 10,867
From: Spring Hill,Florida
Default

Originally Posted by slater333
Does anyone happen to run (or used to) the eb48 at dirt burners in Livonia mi? Talking to one of the guys there who knows the track and rides very well say that people say the eb48 is very loose in the rear on the track. Seems like a setup issue but hey I'm no setup guru.
It is all in setup. I get the same comments at my local track. I let people try my car so they can see it for themselves. The car will roll more than anything available because it is so narrow. If you reduce the roll to be similar to other cars, it will yield similar traction but due to the fact that the weight placement of the tekno, it changes directions more quickly and is more predictable. I have run many cars, when this car is set up right, there is nothing out there that compares. It just requires you to think outside the box. It doesnt like to be setup like most cars.
protc3 is offline