Originally Posted by
MODELTECH22
What type of surface are you running on, and what is your set-up??
Indoor high bite clay.
7000 front diff
5000 rear diff
blue swaybar front
orange swaybar rear
32.5 wt oil front
30wt oil rear
stock shock mounting on shock tower and arms
1.2mm pistons front/rear
yellow springs front/rear
6mm shim on center hole on exotech hub and 2mm shim outter hole on bulkhead
3-2 block rear (stock)
2oz's of sticky weights around servo
25mm ride height
locked clicker (full time 4WD)
AKA Wishbones (clay)