R/C Tech Forums - View Single Post - NOVAROSSI (#367 Buggy.21) 367 Buggy Plus 2 Off-Road Engine
Old 04-27-2013, 10:24 AM
  #1  
dakilo
Tech Fanatic
iTrader: (53)
 
dakilo's Avatar
 
Join Date: Mar 2004
Location: Hutchinson, Kansas
Posts: 764
Trader Rating: 53 (100%+)
Default NOVAROSSI (#367 Buggy.21) 367 Buggy Plus 2 Off-Road Engine

I bought this in a package deal from a user on RCTech, User said it was NEW, motor had a clutch installed on it but never ran, I took the clutch off. I removed the backplate to look inside, Motor appears to never been ran, I am selling this for sold Shipped in the USA Paypal only. Thanks

Rcmart has this same motor listed, here are the specs.

NOVAROSSI (#367 Buggy.21) 367 Buggy Plus 2 Off-Road Engine (2008)

Recommendation: This engine has been developed to be used with a fuel with a maximum of 25% nitro

content and with an oil percentage not lower than 10%. We therefore suggest not to use it with

different percentages compared to the ones specified here above.
Glowplug: The glowplug of engine is a Standard type glowplug. Standard glowplugs have a different shape

than Turbo glowplugs and therefor are not interchange able with engines that are using Turbo glowplugs!
Crankshaft: The crankshaft has a special shape to reduce turbulences inside the crankcase. It has a

black coating to reduce the wear on the crankshaft. The front part was extended to improve the seal

against fuel leaking.
Sleeve: The sleeve has 7 transfer ports and an exhaust with booster ports. The special shape and

positioning of the ports, covered by a patent, improve the internal fluid-dynamics to obtain the

maximum possible performance.
Cooling head: The cooling heads of the PLUS 2 engines are made lighter by making aditional holes in the

cooling fins. This reduces the overall mass of the engine.
Combustion chamber: The combustion chamber is supported by an O-Ring which is placed between the

combustion chamber and the crankcase to reduce the vibrations of the combustion chamber.

Specification
Engine Size: .21
Displacement: 3.49 cc
Maximum power: 2.97 hp
R.P.M. (M.P.): 35.000 rpm
Practical Range: 6.000÷ 40.700 rpm
Bore x Stroke: 16.26 mm x 16.80 mm
Ports nr.: 9
Rear Ball Bearing Type: Steel
Starting: Starterbox
Crankshaft Type: 14,50mm - TURBO SG
Carburetor Type: 8,5mm - Slide
Carburetor Material: Plastic
Carburetor Adjustment: Single
Glowplug type - Code: Standard - C7G
Exhaust position: Rear exhaust
Fuel type: Advise 25% Nitro
Attached Thumbnails Click image for larger version

Name:	20130427_113008.jpg
Views:	236
Size:	167.5 KB
ID:	1061379   Click image for larger version

Name:	20130427_112904.jpg
Views:	258
Size:	187.1 KB
ID:	1061380   Click image for larger version

Name:	20130427_112447.jpg
Views:	284
Size:	139.9 KB
ID:	1061381   Click image for larger version

Name:	20130427_112401.jpg
Views:	260
Size:	148.3 KB
ID:	1061382   Click image for larger version

Name:	20130427_112352.jpg
Views:	233
Size:	135.1 KB
ID:	1061383  


Last edited by dakilo; 04-29-2013 at 04:52 AM.
dakilo is offline