When you say alloy retainers do you mean to prevent side to side movement of the rollbars in the bulkhead? If so i have ran these for years, buy them off Fastrax in the UK they are meant for nitro cars for the throttle and brake linkages. Just makes it all a lot more precise. Also makes roll bars are home made ones iirc.
The new suspension was made by david jun for his evo 4, they dont know if it will be made or not.
Rick
Originally posted by TryHard
Hey guys
benn looking at pictures of tamiya cars from the worlds here
http://www.radiocontrol.gr/galleries...gtamiya051104/
Noticed some interesting things.
Looks like marc wasn't running the chassis braces, and also had some alloy retainers holding the roll bars in place.
Marcs car front end
Also from that pic, might be able to figure out the setup on that car (certainly looks like the race one with all the weight on)
Also noticed therse new wishbones and hubs on what looks like an evo4... Looks as though the end of the shock is now mounted on the bottom of the hub.
New wishbones/hubs
New wishbones/hubs 2
New wishbones/hubs 3
So new suspension set in the future then?
Ed