Originally Posted by
Maximo
the extra 6% oil is definitely going to dramatically reduce performance.....I wouldnt even try to push the top end till you go back to the regular formula.... All that oil will disrupt combustion and will end up tricking you into running overly lean in order to get it to clear itself out.... I would take it easy on top end running till you use up that fuel with the extra oil... If your trying to push performance all that extra oil will do more harm then good.... Also I Would use a 41001 manifold and a 9886 pipe.... The pipe header you run is too lazy for me on that engine.....
6%
NitroRC.com Custom Fuel Blend Recipe:
According to the figures you just gave us, your current fuel has, 30% nitro content and 9% oil content, leaving 61% methanol.
You have indicated that you wish to increase your oil content by 6% to a new total of 15%
In order to accomplish this you will simply need to add 8.8 ounces of castor/synthetic oil to your 128 ounces of fuel.
When you're done, you should end up with 136.8 ounces (1.07 gallons) of newly blended, custom fuel.
Custom Blend Results
Starting Nitro: 30% - - - - - - - - Ending Nitro: 28.1%
Starting Oil: 9% Add oz Oil: 8.8 Ending Oil: 15%
Starting Mthnl:61% - - - - - - - - Ending Mthnl: 56.9%