Originally Posted by
mkorn
There have been a few servos that have shown signs of shaking. It does not affect the servo and it will not cause it to fail. It is however annoying and we are working on fixing the problem. I assure you it will get fixed. ProTek servos outperform everything out there and we are very upset that some of our customers have had a problem.
If ANY of you have any issues with your ProTek servos contact our customer service department for repair or replacement. We will not rest until each and every one of you are satisfied with our product.
Now that's how you stand behind your products!! Customer service and support, at it's very finest!
I have a 100S, 100T, 130S, and 130T currently.. All have been nothing short of exceptional and have also taken me straight to the podium, multiple times! Recently, I've noticed a slight amount of 'backlash' in the gear mesh on my 100T servo in my Pro2 SCT. With or without power, at neutral, you can wiggle the horn and primary gear about an 1/8", at the end/outside of the servo horn. No 'shakes' as of yet, and it still performs fine, it's just that I've noticed a slight left to right movement, while tearing down the straightaway.. And upon further inspection, the above is what I've come to as a preliminary conclusion.
Any ideas?
Thanks for the great products, guys.. And Marty, you're the man!!
