R/C Tech Forums - View Single Post - SC10 Thread Part 2
View Single Post
Old 04-08-2013 | 03:06 PM
  #3383  
CounterAttack's Avatar
CounterAttack
Tech Rookie
 
Joined: Apr 2013
Posts: 12
Default

Originally Posted by Wildcat1971
Is it a ball or gear diff? You were already told to check out the motor. So, I wont go over that again, just clean it and blow the slator out. I was racing last saturday at CV and i will be again next week if you need a hand.

Let me confirm:
1) if you get on it hard, it never goes full speed and makes a clicking sound.
2) if you roll the throttle less aggressively no click and you can hit full speed?


I would check the slipper and diff. The slipper would not click but squeel, so that's probably not it. A ball diff would "bark", not really a clicking sound. A rock in the spur or out-drives could also make a clicking sound, but that would not be better if you accelerated slower. Again, I can take a look on Saturday if your coming out again.
Yes, what you confirmed is true, it will just stay at a very slow speed clicking. I have messed with the slipper clutch for a while but I still can't fix the problem. I would greatly appreciate if you could help me out and I will definelty try to make it this Saturday. It is a ball diff... Also I don't think it could be the motor because this only happens when it's on the ground. If I hold it in the air, no problem. Thanks for the feedback! : )

Last edited by CounterAttack; 04-08-2013 at 03:18 PM.
CounterAttack is offline