R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 04-04-2013 | 06:58 PM
  #3548  
Stealth_RT
Tech Master
iTrader: (5)
 
Joined: Nov 2003
Posts: 1,850
Default

Originally Posted by rcq
Need some advice.
When I was running first e-buggy I have find good setup for my driving style. Buggy have forgiven for my mistake and run good on slippery track. Event in the last race the best lap time was the same like our best driver. But After that I put V2 rear + diff gears and erevything changet to bed side. Now I have worse tracktion on rear. I can not push after corners. On break the rear end is lose, I have to work with break more, like ABS. And now I have less turning.
My first setuo was:
Diff: 5 7 3
Oil shock: 30wt front 15wt rear. Springs: front purple rear blue
After V2 + new gear diff installed I did this changes:
Diff : 10 12 6
The same Shock oil and spring.

What you could recomend for better rear tracktion and more turn on bigger spead?

Thanks
I think you are only supposed to increase the diff oil weight by about 2000 when going to the new V2 internal diff gears. Yours are more like doubled the weight. Go more like 7 9 5 and try it. The new rear shock tower will stand the shocks up more than the original tower. You might have to play with the oil and springs. The 2.0 rear setup should plant the car more.
Stealth_RT is offline