Hi guys, i have a problem with my Mamba Monster Esc. Set up is: SCRT10, Speed Passion 3.5 feigao II 550 size motor, towerpro servo, 2s lipo and GT3b radio. Problem is, when i turn it on it blinks red first before making the correct initial start up tone. When i pinch the throttle, the motor turns for about a second then shuts off and the esc will blink red (very fast) with a solid green. It seems like the ESC is the problem since i already tried a diff esc (motor is good), 3 different rx and 4 newly charged lipos. If i just turn off the lipo cutoff or use another firmware will it stop doing this? I also recalibrated it, same thing.