R/C Tech Forums - View Single Post - RcRenew.com engine resizing and epoxy crank re-filling

04-01-2013 | 07:42 AM

#1623

Rcrenew

Tech Elite

iTrader: (9)

Joined: Jun 2010

Posts: 3,077

Quote:

Originally Posted by Flip it

Ran the A852 that Lance freshend up and modded. Loved the stock engine but the modded version is a whole lot more. Ran it in a truggy over the weekend when my .23 played up. Engine pulls as hard but a bit smoother off the bottom than the stock through to stupid fast top. Running against a mate with the same truggy with almost the same set up who is running the A352 we ran within half a second of each other all weekend. I ended up P3 and he was P4 in the A final. Going by the fuel used at each stop measured through a fuel gun this is a easy 10+ minute engine at full race pace.
Dave

Thanks for the update Dave Im glad you like it. The Alphas can be alittle abrupt on the bottom for most, so The Race Mod smooths out the bottom just a tad to make it a little more controllable and kicks up the mid and top end power, As well as adding about 1 minute runtime over stock.

Reply