R/C Tech Forums - View Single Post - New LRP Flow Esc
View Single Post
Old 03-31-2013 | 10:49 PM
  #443  
LEM C's Avatar
LEM C
Tech Adept
iTrader: (1)
 
Joined: Nov 2012
Posts: 217
From: Seatown
Default

Originally Posted by metalnut
I have the Flow Competition, so it came without a fan. For the hot outdoor days, I'd like to have the option of running one. I'm assuming any 30mm fan will fit? Can someone recommend a good one that will hook up to the open ESC plug and not have to plug into the receiver? I think the LRP SXX fan is only 25mm, so I don't believe that would fit.
PM Kody to see if he could get you one before the ECC this Saturday.
Originally Posted by rossb
I just ran my Flow for the first time with a 12 scale car on carpet. I am running a Novak Ballistic 13.5, a 1s LIPO, and a Novak booster. The brakes seemed to be very ineffective.

Has anyone else experienced poor braking with this ESC?
I did once during a race. I went to turn the ESC on and the throttle and brake settings were whacked out as if the profile was erased. I reset the ESC real quick and adjusted all the profiles back then ran a qualifier. During the qual I noticed my drag brake setting was fine but push break was ineffective. I reset the ESC again and the breaks worked after that. Try resetting it...may work.
LEM C is offline