Originally Posted by
picco007
RC Tactical and Chicky,
Here is a pic of the springs, the Pink v1's are on the left (shorter) at 62mm, the V2 Blue is to the right of the pink which is 68.5 mm. The next spring is the V2 Purple that measured at 72mm, (installed in car) that is the reason why I had my collars all of the way up and can't make the car any lower than 30mm-31mm. I'm hoping to get this taken care of soon. Thanks for all of your help.
Ronnie
I talked to Billy and he said to squeeze the springs a few times all the way and that should do the trick. They settle into a smaller size after you do that.
Originally Posted by
Racermac73
But its almost to stable in straight line like it won't turn quite enough . don't get me wrong car is very close and lays down the fastest laps weekly I'm just looking for that last 1%
You can try a softer rear spring, longer rear wheel base, lighter rear oil, less anti squat and a higher rear camber link for more rotation. I also like 12 deg castor blocks.