Originally Posted by
muney
im gettin kinda confused here..if all im going to do is tackle the rear toe in to zero..would i need a front rear and a rear rear mounts..OR would i just leave the front rears as stock and buy just the rear rear mount to straighten up the toe?
you should grab the rear mounts at least as you can't just install the rear mount without the suspension balls and that could change the length of the pins so your better off grabbing all the rear mounts and the suspension balls, and if you get all the rear mounts in alloy you might as well get the fronts as well to even it up. I also wouldn't take the rear to 0* toe in even 1* isn't enough. you won't have an enjoyable experience learning to drift this chassis with 0* toe in on the rear, the toe helps to control the drift on the rear. I did have 1* toe in but changed to 2* and that helped a lot.
