R/C Tech Forums - View Single Post - Kyosho Ultima RB6 & RB6.6 Car Thread
View Single Post
Old 03-27-2013, 07:40 PM
  #5923  
Rfury
Tech Elite
iTrader: (6)
 
Join Date: Apr 2007
Location: East Atl Metro Area
Posts: 4,556
Trader Rating: 6 (100%+)
Default

I have beat the hell out of my car and the chassis has not dented in the rear transmission area. I have had the car about 2 months.

I have tweaked the chassis a bit. I landed very wrong over a jump and got a slight (about 1mm deflection from perfectly straight) bend in the chassis (from nose to tail, not side to side). If you don't put a straight edge on it, you can't even see it.

The top of the jump was flat and the front and rear tires did not make contact but the center of the chassis did. There was a kicker in front of the landing and I landed from about 12 or so feet in the air on that flat spot. Made the worst sound you could ever imagine.
Rfury is offline