Originally Posted by
nolo148
Advance motor timing? To do so loosen the 3 screws on the motor, tap the rotor on a table or flat surface which will losses the sensor board and turn it to the right (20*) afterwards just screw in the 3 screws. Check for the motor temp to. There's also a video on YouTube showing how to do it.
If you need more timing on your motor to get more speed, you can purchase different circuit boards from S/P. The boards go from 20-30 degrees, 30-40 degrees timing, nd 40-50 degrees timing. They work great, but you really have to keep an eye on your motor temps.