The servo problem sounds to me like you need to adjust your throttle trim if you tx has that which I'm sure it does, if not take your servo horn off turn on your servo and then put the servo horn back on in the neutral position. As for it going in reverse after hitting something that's odd, only time I have heard of that is when an engine is started backwards.
Originally Posted by
Acecom1
thanks for all the info guys. im doing everything everyone suggests one at a time so far nothing has worked. today i did however get it pretty close i think. i think the engine is still working itself out. but when i mess with the LSN the idle is VERY inconsistent. like it will wined up then down, up then down, up then down.
On an off note, today i hit something with the front end pretty hard( i know its going to happen) but what was weird is that the truggy started to go in reverse when i hit the throttle instead of forward. i was like wtf....? so i shut it off inspected it and nothing seemed to be damage. so i started it back up and it was fine, it goes forward.
But idk if i just didnt notice before or if something actually is wrong. when the truggy is OFF and i mean the servos it will "free roll" but when i turn ON the servos its like there is a brake that is on until i hit the throttle then it frees up. But as soon as i let the throttle off its like the brakes are on again
again i hadnt noticed before is this normal or no? im sorry if i should post this somewhere else or if i have to much going on in one post im sorry let me know and ill post it somewhere else. thanks guys!