Originally Posted by
Josh Hohnstein
The timing should max out somewhere around 24 degs on the endbell, that is where I would run it.
FDR on a small track will be around 4.5 in a tc.
You will want to use a fan on the motor and check the motor temp after a minute or 2.
Turning the timing down will help with temp if its getting hot.
But my endbell has only 20 deg of max timing. I will try 4.5 fdr but temperature, also with 3.97fdr, don't seem to be a real problem. Maybe because I was setting improperly my motor?
Thanks everyone for help