R/C Tech Forums - View Single Post - SC10 Thread Part 2
Thread: SC10 Thread Part 2
View Single Post
Old 03-17-2013 | 07:08 AM
  #3181  
Acill's Avatar
Acill
Tech Master
iTrader: (24)
 
Joined: Jun 2010
Posts: 1,288
From: Port Hueneme, CA.
Default
Originally Posted by salmans21
Hi,

I just purchased a used sc10 and was wondering if anyone has used / is using the proline power stroke shocks on the sc10. I have a brand new set of powerstroke shocks that I purchased for a traxxas stampede to truggy conversion that I never got around to doing. According to proline they do work on the sc10 but when I put them side by side the proline shocks seem to be about 5mm longer than the stock sc10 shocks (I have a Factory Team SC10).

Is it even worth using the powerstroke shocks or are the stock ones really good? (The ones on my truck seem to be leaking).

Thanks for the help!
I run the powerstrokes over the AE big bores. I run Avid springs on mine and have also replaced the stock pistons with M2C racing conical pistons. It makes the shocks amazing! You will also need to get the universal mounting kit from proline or shim them up yourself.

Here's some older shots I found before I put the avids on so you can see how stock will look. I used the traxxas upper spring retainers after I put on Avid springs too. They felt a bit more secure under the ride hight nuts, but fit fine without them as well.


Last edited by Acill; 03-17-2013 at 07:23 AM.
Acill is offline  
Reply