Originally posted by markp27
Suppose that show that the quality must be ok and that the bladed anti-roll bar is an effective mod for the car. Would be interesting to compare his setup with Michaels, to see if the 2.5mm or 3mm is approximate equivatlent to the setup which Fantini has.
Mark, this blade rear ARB should be better (stiffer) because unlike the other one, the cross-members are made of al. If the fittings are all precise then there is no slop or flexing.
Most if not all 1/8th cars use rear blade ARBs. Like the front, you now get fine adjustments in the rear too.