1 Specification
1.1 Output: Continuous 150A, burst 950A.
1.2 Input: 6-18 cells NiMH/NiCd or 2-6S LiPo. (But 2S lipo or 6 cells NiMH is not recommended)
1.3 BEC: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0002Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors.
1.6 Suitable Motor: * Note#1 When working with 4 cells Lipo: KV<=3000 When working with 6 cells Lipo: KV<=2400
1.7 Suitable Car: 1/8 On-road/Buggy/Truggy/Monster competition.
1.8 Size: 58mm(L) * 46.5mm(W) * 35mm(H).
1.9 Weight: 105g (Without wires).
*Note #1: The above KV number is the value of a 4274 sized motor (Diameter=42mm, Length=74mm).
4 cell < 3000kv
6 cell< 2400kv
Also not recommended for use with 2 cells.
http://www.falconsekido.com/products/xerun-150a-sd