Originally Posted by
patorz31
So how much droop do you run in your m06 with the 225mm WB on a high traction carpet track?
I am running blue front springs and yellow rears. With S-grips all around. Ride height is 3mm. One o-ring inside the shock.
I get it into the corner the car seems to roll over to the outside and then diff out and do some weird stuff when it comes flattens out.
I was thinking of adding spacers inside the shock to cut the droop.
Any Ideas?
Current setup as follows;
Tamiya 54000 shock set w/matching carbon shock towers
Front:
40wt
red spring
(1) black o-ring
Rear:
50wt
yellow spring
no limiters
rear outer hinge-pin so the lower shock mounts to the outside
Hope this helps...