Originally Posted by
goehm
It doesn't show that, you're misinterpreting their setup sheets. It shows 3 degrees total toe. It shows one portion of the car for each setting, and the toe settings are for the culmination of both sides.
Otherwise, you'd see cases where people are running 2 degrees front toe out and 6 degrees rear toe in. That'd be a disaster!
That's not correct. It is per side on the setup sheet. Almost all cars out there have 3degrees of toe in PER SIDE as a starting point. The setup sheet shows 1 half of each end. You do the same things to both sides of that end. If it says 3 degrees you have 3 degrees per side. The shock oil is only mentioned once - do you split it in half to fill each shock?