Originally Posted by
rraden
Thanks, that's what the clay setup shows, 3 deg per side! See attached picture. Maybe my measurement system is flawed. But standing the car on end and measuring the angle of the rear wheels should be close. I'll find a setup system and check it there.
It doesn't show that, you're misinterpreting their setup sheets. It shows 3 degrees total toe. It shows one portion of the car for each setting, and the toe settings are for the culmination of both sides.
Otherwise, you'd see cases where people are running 2 degrees front toe out and 6 degrees rear toe in. That'd be a disaster!