R/C Tech Forums - View Single Post - TC3 Forum
Thread: TC3 Forum
View Single Post
Old 03-07-2013, 09:20 PM
  #11932  
AudioStylz
Tech Regular
iTrader: (15)
 
AudioStylz's Avatar
 
Join Date: May 2010
Location: Kenosha, WI
Posts: 498
Trader Rating: 15 (100%+)
Default

Originally Posted by Rojna


drop that TC3 down to 5mm!! Unless its a Rally TC3
LOL nah. It's at 9mm because the last time I raced this TC3 in Stock Foam I was racing on a fairly rough asphault track. Anything less than 7mm and you'd be scraping the chassis hard, 9mm made it just slightly scrape on the bigger bumps. Cool seeing sparks going down the 115' long straight under the lights lol.

Come to think about it, I probably would have ran better with the rally kit!

I just never got around to adjusting ride height today. Still in the swing of getting back into racing after a 4 month hiatus so my thought process of what I need to adjust and what adjustment does what is going to take some time. Tuesday I'll be looking at ride height, legal weight, shock position, roll center, camber, front toe, wheel base.....

Today during my 12 minute run I noticed after 4 minutes the tc3 would start getting looser with every lap I took. I was getting to the point that I just couldn't keep it in the right direction just coasting the corners.

I'll admit though, my driving skills were definitely on the rusty side!
AudioStylz is offline