Originally Posted by
Jstall7543
I had to clearance the chassis about 1/4 back and cut the bottom of the rear belt cover off flush and cut about 1/8 in and down on the rx8 fan shroud and relieved the battery mount almost flush with the rear screw. It's a very tight squeeze but it's do able and the belt cover all comes off with a little finesse. The truck drove pretty good today, it did feel a little light in the back so im dropping down to a yellow swaybar in front.
well im all for doing a little diy but im not planning on taking anything out of my exotek chassis. i just got it and installed it. i plan to throw in my pro4 4000 and hit up exeter hobbies this weeekend. small indoor techincal track. i would rather just add a little stick weight to the side where yours is next to my reciever or behind on the bowl to compinsate for the rx8 and motor on the one side. thanks for your reply