Originally Posted by
jonasm48
The sct pro can run pretty much any motor with a 4s lipo. My motor is a long rotor 4 pole 2200kv truggy motor, and it's a handful. My sct pro handles the setup beautifully. I don't notice the 150a vs 120a sct pro esc running different really. I choose the sct pro because it is smaller and easier to access programming input. The sct pro is an esc that will blow your mind, I bet you'll ditch your rx8. Hw sensored esc's are so smooth, easy to adjust, and unbelievably cheap.
I have no ties to HW btw. I've had 4 Hw esc's and 2 Hw motors, all of them have been great. If I were you I'd drop the $90 on the sct pro and it'll be a bit less of a headache.
Just remember the sct pro isn't rated above 4s, so take that into account.
thats what i think so, i also have 2 HW esc but for 1/10th only, and been hearing good review on the 150 and sct pro ( modified 120A to accept 4S, am i right to say that, hahaha). only concern (now ) would be the weight biased if i changed to a much lighter ESC as my 2 Lipo ( saddle packs) setup is a bit heavy ( batt side) and if i changed to a smaller SCT pro, handling might be affected. thats my only concern but if the price is that cheaper then im only a basher so i could consider.
Thanks for your inputs...