ok ran into a few minor issues. First the shock are leaking pretty bad threw the bleeder holes. Another is the steering servo saver, part of it is hitting the carbon fiber steering servo housing. The biggest one so far is the throttle linkage and throttle servo horn. The horn seems to be way to tall and not long enough. The break linkage is on a terrible angle. The issue is the horn is to tall by a guess of a 1/4 inch. And the throttle linkage is also on a bad angle. I have tried to rotate the carb barrel and turning the carb but I will not run it this way, Know it will eventually burr my carb or blow the servo. The throttle servo is a savox 1258. Suggestions would be great. But overall very impressed with everything else