R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 02-14-2013 | 06:49 PM
  #28131  
sneako's Avatar
sneako
Tech Addict
iTrader: (7)
 
Joined: Mar 2010
Posts: 510
From: SEA
Default 0 degree hubs

Originally Posted by 5th wheel
Space coast rc in cocoa. Needs to be more stable in corners
I use the stock U brace so I can't say what that mod will do.

I just changed over to the B44 plastic hubs (#9730) and saw a big change in how my car handled in and out of the corners. I run at a track similar to the one you described in your other post. I also run a 17.5 with Barcodes.

My buggy was pretty hooked up the other day after making that change. I plan on swapping to 30 degree caster blocks next to see how that changes the steering.

I use the Brent Thielke Club Racing Indoor Clay set-up sheet with very few changes.
sneako is offline