R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 02-10-2013 | 01:58 PM
  #28068  
snowman_evil's Avatar
snowman_evil
Tech Fanatic
iTrader: (30)
 
Joined: Sep 2009
Posts: 919
From: Gold Coast, Queenland
Default

Originally Posted by kavee
thanks for that but now i am confused:
you said you run both in 17.5 blinky but you send a link for 7.5T motor?
I am new in the hobby, (about a year) always thought – if the number in the motor is lower 5.5 < 6.5 than the motor is stronger…
Am I right?

Does the esc and the motor you send are compatible?

Eran
I posted the 7.5 turn motor as I was replying to someone else who asked for a link of a good/cheap 7.5 motor and an ESC to match.

Yes, that's correct, the lower the turn of the motor (higher KV rating) the faster/more powerful the motor is.

Personally I run a 17.5 turn with the 60amp ESC but if you want to run anything more powerful then a 9.5 turn motor, you have to use the 120amp ESC as the 60amp isn't capable of supporting the more powerful motors needs.

So in short, yes the motor and ESC I linked will work together.


Hope this helps
snowman_evil is offline